Skip to main content

Products

Balancers

Balancers are an essential piece to maintaining your swimming pool water. Not only do they help balance pH, total alkalinity and mineral levels, they control scale and prevent metallic stains. Simply put, pool owners everywhere trust GLB® to keep their swimming water comfortable and protect their pool surfaces and equipment from undue harm. Find your pool’s ideal balancer below.

GLB pH Up front of pack
GLB pH Up back of pack

GLB pH Up

Use pH Up to raise the pH of your pool water and help maximize sanitizer efficiency, protect pool equipment and most importantly, keep your swimmers comfortable.

– pH should be maintained between 7.2 – 7.8.

– Compatible with chlorine, bromine, mineral purification systems, salt water chlorine and ozone sanitizing systems.

Available Sizes: 5 lb.


GLB pH Down front of Pack
GLB pH Down back of pack

GLB pH Down

Use pH Down to lower the pH of your pool water and help fend off scale formation, prevent cloudy water and most importantly, keep your swimmers comfortable.

– pH should be maintained between 7.2 – 7.8.

– Compatible with chlorine, bromine, mineral purification systems, salt water chlorine and ozone sanitizing systems.

Available Sizes: 2.5 lb. & 10 lb.


GLB Alkalinity Up 10 lb front of pack
GLB ALK UP 25LB back of pack

GLB Alkalinity Up

Use Alkalinity Up to increase the alkalinity levels, balance pool water and prevent pH levels from bouncing or fluctuating too high or low.

– Total alkalinity should be maintained between 80 – 120 ppm.

– Compatible with chlorine, bromine, ozone, salt water chlorine and biguanide sanitizing systems.

Available Sizes: 5 lb., 10 lb. & 25 lb.


GLB Calcium Hardness up front of bucket
GLB calcium increaser back of pack

GLB Calcium Hardness Up

Use Calcium Hardness Up to increase water hardness levels, help prevent equipment and surface corrosion as well as minimize foaming.

– Calcium hardness levels should be maintained at 150-250 ppm.

– One pound increases calcium hardness 10 ppm in 10,000 gallons of water.

– Compatible with chlorine, bromine, mineral purification systems, salt water chlorine and ozone sanitizing systems.

Available Sizes: 8 lb. & 25 lb.


GLB stabilizer front of pack
GLB stabilizer back of pack

GLB Stabilizer

This product is specifically designed to maximize chlorine efficiency and reduce the amount of loss from sunlight exposure.

– Stabilizer levels should be maintained at 20 – 50 ppm.

– Add product slowly to skimmer with pump running, following dosage directions on label.

– Compatible with all chlorine systems, including salt chlorine generators.

Available sizes: 4 lb.

Find a Dealer Graphic Find a Dealer Graphic